青岛奥运水域主要污染物环境容量的预测     

徐艳东  娄安刚  谭海涛  龙绍桥  石晓勇 《海洋科学》2006,30(2):38-42

通过对青岛奥运水域现场调查和资料分析,确定了奥运水域污染物的主要来源和主要污染物,然后在潮流模拟的基础上,利用物质输运方程数值模拟了2000~2003年污染物浓度的空间分布,其结果与现状调查基本吻合。最后再利用该输运方程,预测了奥运帆船水域的化学需氧量(COD)、氨氮(NH4 -N)、总磷(TP)的环境容量(中潮时分别为:69.948 t/d,7.46 t/d,0.5455 t/d),为奥运水域的目标管理提供科学依据。  相似文献   

浙江西沪港重金属铜的配位容量和形态分析   总被引：3，自引：2，他引：3       下载免费PDF全文

吕海燕  王正方  傅和芳  冯旭文 《海洋学报》2003,25(3):47-52

根据2000年6月10～14日在浙江省西沪港采集的海水样品,利用AA-800石墨炉原子吸收分光光度技术和阳极溶出伏安法测定样品中重金属铜的含量,获得铜在海水中受不同的有机配体控制.不同粒级的铜表观配位容量表明西沪港海水过孔径1.00μm微孔膜的(ACuCC)较高,为144.4nmol/dm3;过0.40和0.20μm滤膜的(ACuCC)分别为103.0和102nmol/dm3;铜的有机配体条件稳定常数的对数值在7.25～9.14之间.铜的总量为21.72nmol/dm3.铜全部为稳定溶解态,其中pH2酸溶态占95.0%,强有机结合态占5.0%.溶解态铜中有机结合态占过滤海水中总铜的61.6%.  相似文献   

珠江口水体中铜与悬浮颗粒物相互作用的研究     

丘耀文  王肇鼎  张正斌  刘莲生 《热带海洋学报》1995,(4)

使用无机离子交换法研究珠江口水体中铜与悬浮颗粒物的相互作用，测出钢与悬浮颗粒物相互作用的ｐＨ曲线呈Ｓ形，其分级离子交换等温线是一种新的“台阶”型；从分级离子交换理论求得分级平衡常数Ｋ１为５．０，Ｋ２为７８．１，珠江口水体中铜的表观络合容量为０．９２μｍ及其条件稳定常数为３．５×１０７。  相似文献   

A computer simulation model for predicting rates and scales of movement of demersal fish on the European continental shelf   总被引：1，自引：1，他引：1  

Arnold  G. P.; Holford  B. H. 《ICES Journal of Marine Science》1995,52(6):981-990

  相似文献   

Behavior of Pile Groups under Lateral Load   总被引：2，自引：0，他引：2  

Yang Keji  Li Qixin Wang Fuyuan Associate Proferssor  Hehai University  Nanjing Engineer  Hehai University  Nanjing 《中国海洋工程》1991,(2)

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.  相似文献   

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil     

Yu Xiaodong  Yan Shuwang Sun Wanhe Postgraduate Student  Tianjin University  Tianjin Professor  Tianjin University  Tianjin Senior Engineer  Tianjin Port Engineering Institute  Tianjin 《中国海洋工程》1997,(2)

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

东山湾贝类养殖容量的估算   总被引：6，自引：0，他引：6  

卢振彬  杜琦  钱小明  方民杰  蔡清海  许翠娅 《台湾海峡》2001,20(4):462-470

以初级生产力为基础，应用营养动态模式和沿岸海域能流分析模型，估算东山湾贝类年生产量分别为269331t和295767t，平均282549t。扣除潮间带、潮下带和吊养区浮筏、随着基及延绳上附着的非养殖滤食性附着动物自然现存量35760t，贝类可养殖量为246789t。应用统计分析和逻辑斯谛种群增长模型估计贝类可养面积为11839hm^2，其中缢蛏635hm^2，石蛎1160hm^2,吊蛎1525hm^2，翡翠贻贝633hm^2，菲律宾蛤仔1154hm^2，扇贝698hm^2，江瑶248hm^2，泥蚶601hm^2，巴非蛤4151hm^2，凸壳肌蛤1034hm^2。1998年实际养殖面积和养殖产量分别为10581hm^2和220564t。尚有1258hm^2,26225t的扩大开发潜力。文中还讨论了合理布局和优化养殖结构问题。  相似文献   

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay     

S. P. Singh  D. P. Tripathy  S. V. Ramaswamy 《Marine Georesources & Geotechnology》2007,25(3):237-249

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.  相似文献   

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system     

Shah Neyamat Ullah  Yuxia Hu 《Marine Georesources & Geotechnology》2020,38(9):1121-1127

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.  相似文献